How long does a well water pump last?
When you draw your water supply from a well, you get fresh, clean water for your family. Of course, to get the water from underground into your home requires a well water pump. If you are new to using well water, you may wonder how long you can expect your pump to last before it needs to be replaced. As long as the pump is properly sized and professionally installed, you should expect your pump to last anywhere between eight to 10 years. The older your pump is, the more likely you’ll need to make repairs or even replace it altogether. If you are experiencing problems with your well pump, you can get expert help with well water pump repair in Hendersonville, Mills River and Asheville, NC from the professionals at All About Plumbing & Septic. Call us today at 828-232-8156 to schedule an appointment.
How can you tell if your well pump is bad?
It’s sometimes difficult to tell if your water well pump is having problems. Often, many of the problems occur in the pressure tank rather than the pump. The pressure tank stores water and manages water pressure, while the pump draws water from the well. They work in conjunction, so any problems could mean either one or or both are experiencing issues. Some common pressure tank and well water pump issues include the following:
- Water pressure fluctuations throughout the home
- The tank produces strange noises or rapid clicking sounds
- The faucets start spitting
- Your shower starts producing scalding water
- Electric bills increase
If you’re having problems like these or others reach out to All About Plumbing & Septic. We can come out, take a look at your system and see if it needs to be repaired.
How do you fix a well water pump?
If you’re experiencing problems with your well water pump or tank like fluctuations in the pressure or if there is no water at all, there are steps you can take to troubleshoot the problems before a professional arrives.
- Make sure the power is on. The power switch near the pressure tank could be off or the double-pole circuit breaker may have tripped. A tripped breaker may mean a broken well pump.
- Check the pressure switch in a ¼-inch tube near the pressure tank. A bad switch will prevent the pump from powering up, so the switch will need to be replaced.
- Bang on the tube under the pressure switch. If the well pump kicks on, the surfaces of the electrical contacts may be pitted or burned and not making a good connection. Temporarily restore the contact surfaces to keep the pump running until you can replace the switch.
Well water pump repair kit
There are several pump kits on the market today. These kits are useful to help keep your well water pump maintained and to make temporary repairs. Kits may have parts like switches or belts or wiring. You may want to have handy tools like voltage testers to check switches. If you have a submersible pump you will need a water well pump removal tool known as a T-handle pitless adapter if you need to remove the pump.
How much does it cost to replace a well pump?
Costs to repair or replace a water well pump will vary. On average a replacement will cost somewhere between $874 and $2,313. Pump units retail for between $100 and $1,200, depending on the type of pump you buy. A submersible pump will run between $200 and $1,200, while a deep jet runs about $175 to $800. The type of pump you install will affect the price of the installation. The depth of the well will also affect the cost. The deeper the well, the more powerful pump motor you’ll need and pump motors can range in price from $100 to $300 or more.
Is a well pump covered under homeowners insurance?
Insurance coverage on water well pumps will depend on the insurance policy you have. Wells may fall under the category of a separate building on your property, so a well may be covered may be covered in the same way as a detached garage. If the well is covered it will be subject to exclusions and perils in the same way that your home is protected. So, your well may be protected from perils like fire or hail damage or even vandalism. Separate coverage for perils like floods or earthquakes will need to be purchased, in the same way you might for a home. Check with your insurer to find out what is covered under policy.
Well water pump repair near me
Your well water pump and the pressure tank are the two main components of your well system. If you are having problems like scalding water coming out of the shower or getting no water at all, you’ll want to get professional well water pump repair in Hendersonville, Mills River and Asheville, NC. All About Plumbing & Septic are the experts to rely on when it comes to well pump problems or any other plumbing issues. We provide a full range of plumbing services. Schedule services with us today by calling 828-232-8156.